top of page

LENS MOTORS

Hedén Motor M26VE 256-3.3k

​

​
Specifications:

​

  • Height: (body): 33mm/1.3” (body with gear housing): 42mm/1.65”

  • Width: 26mm/1.02”

  • Length: 117mm/4.6”

  • Weight: (without bracket and gears): 222gr/7.83 oz

  • Connector: LEMO 7 pin connector

 

​

Includes:

​

  • Hedén M26VE Motor

  • 0.8 gear module

  • Bracket with 19mm to 15mm (0.75” to 0.59”) reduction insert

 

Hedén Motor M21VE-L 256-3.3k

​

​
Specifications:

​

  • Height (body): 28mm/1.10” (Body with gear housing): 34mm/1.33”

  • Width: 21mm/0.83”

  • Length: 106,5mm/4.19”

  • Weight (without bracket and gears): 135,5gr/ 4.78 oz

  • Torque: 1.0 Nm

  • Connector: LEMO 7 pin connector

​

​

Includes:

​

  • Hedén M21VE-L Motor

  • 0.8 gear module

  • Bracket with 19mm to 15mm (0.75” to 0.59”) reduction insert

Hedén M26T Analog Servo Lens Motors

​

​
Specifications:

​

  • Length: 108,5mm/4.27”

  • Diameter (body): 26mm/1.02”

  • Weight: 187g/6.6 oz

  • Torque: Approx 1.20 Nm

  • Connectror: LEMO 4 pin connector

​

Includes:

​

  • Hedén M26T Motor

  • Your choice of 42mm (1.65”) or 35mm (1.38”) 0.8 module gear

 

Hedén CARAT Kit with M26VE-256

​

​Specifications (Transmitter):

​

  • Length (ex antenna 28mm/1.10” and strap fastener 6,5mm/0.26”): 128mm/5.03”

  • Height (ex control knob): approx. 30mm/1.18” (inkl. control knob):  78mm/3.07”

  • Width: Approx. 81mm/3.18”

  • Weight: Approx. 456gr/16 oz

  • Bluetooth range (Indoors): 15 – 100 meters (50-330 feet) depending on building materials, interference and other obstacles (Line of sight): 500 meters (1650 feet)

  • Power source: 9V

​

Specifications (Reciever):

​

  • Length (ex antenna 27mm/1.06”): 70mm/2.76”

  • Height: 30,5mm/1.2”

  • Width: 60mm/2.36”

  • Weight: Approx. 158 gr/5.57 oz

  • Bluetooth range (Indoors): Approx. 15 – 100 meters (50-330 feet) depending on building materials, interference and other obstacles (Line of sight): 500 meters (1650 feet)

  • Power source: 14.4V PTAP

​

​

Specifications (Cables)

​

Motorcable;

  • 7 pin LEMO compatible male Connectors at both sides.

  • Approximately 60 cm (23.6”) long.

 Power cable;

  • Power cable;

  • LEMO compatible 2 pin male connector to PTAP male at the other side.

  • Approximately 60 cm (23.6”) long.

​

Connectors used in this assembly are not manufactured by LEMO but are made to the same specifications and are LEMO compatible.

​

The system is delivered in a Hedén carry case containing:

​

  • 1 x CARAT transmitter

  • 1 x CARAT receiver

  • 1 x Hedén digital servo motor Hedén M26VE

  • 1 x Gear set of four (0.4, 0.5, 0.6 and 0.8 module)

  • 1 x Bracket with 19mm to 15mm (0.75” to 0.59”) reduction insert

  • 2 x White scale rings

  • 1 x Power cable

  • 1 x Motor cable

  • 1 x Hedén neck strap

  • 2 x Rechargeable lithium battery

  • 1 x Battery Charger

bottom of page